# Flovo Tech - Full Technical Knowledge Base & Inventory Data

> Comprehensive technical specifications, inventory metrics, material characteristics, and pricing data for Flovo Tech (Kathmandu, Nepal).

## 3D Printing Service Parameters

The 3D Print Studio (accessible at https://www.flovotech.com/print) uses custom volumetric geometry slicing and OrcaSlicer integration.
- Maximum File Size: 100 MB (.STL and .3MF files accepted)
- Slicing Capabilities: Automatic bounding-box calculation, overhang angle detection, tree support generation, volumetric infill calculation (10% to 100%), custom layer heights from 0.08mm to 0.40mm.
- Base Pricing Structure: Material weight (Rs/g) + Electricity cost (Rs. 12/unit) + Machine time wear (Rs. 35/hr) + Base setup fee (Rs. 50) with Rs. 150 minimum order threshold.

### Active 3D Printing Materials & Color Inventory

#### PLA Standard (PLA)
- Density: 1.24 g/cm³
- Rate: Rs. 2.5 per gram
- In-Stock Colors: Black, White, Grey, Red, Blue, Orange, Green, Yellow, Silver

#### Kingroon PETG Basic (PETG)
- Density: 1.27 g/cm³
- Rate: Rs. 3 per gram
- In-Stock Colors: White, Black, Grey, Copper, Coffee, Transparent, Orange, Skin, Beige

#### TPU 95A Flexible (TPU)
- Density: 1.21 g/cm³
- Rate: Rs. 4.5 per gram
- In-Stock Colors: Black, White, Red, Blue, Semi-Clear

#### ABS Durable (ABS)
- Density: 1.04 g/cm³
- Rate: Rs. 2.8 per gram
- In-Stock Colors: Black, White

#### PLA Silk / Glossy (PLA)
- Density: 1.25 g/cm³
- Rate: Rs. 3.2 per gram
- In-Stock Colors: Gold, Silver, Copper, Silk Red, Silk Blue, Silk Green, Rainbow

#### PLA Matte (PLA)
- Density: 1.24 g/cm³
- Rate: Rs. 2.8 per gram
- In-Stock Colors: Matte Black, Matte White, Matte Grey, Desert Tan, Olive Green

#### ABS Durable (High Temp) (ABS)
- Density: 1.04 g/cm³
- Rate: Rs. 2.8 per gram
- In-Stock Colors: Black, White, Grey, Red

#### ASA Outdoor Weather-Resistant (ASA)
- Density: 1.07 g/cm³
- Rate: Rs. 4.2 per gram
- In-Stock Colors: Black, White, Grey

#### Carbon Fiber Reinforced (PLA-CF) (PLA-CF)
- Density: 1.29 g/cm³
- Rate: Rs. 5.5 per gram
- In-Stock Colors: Matte Black CF, Dark Grey CF

#### PETG Carbon Fiber (PETG-CF) (PETG-CF)
- Density: 1.3 g/cm³
- Rate: Rs. 6 per gram
- In-Stock Colors: Matte Black CF

#### Nylon Tough (PA6 / PA12) (Nylon)
- Density: 1.14 g/cm³
- Rate: Rs. 7 per gram
- In-Stock Colors: Black, Natural White

#### UV Resin (SLA / LCD 405nm) (Resin)
- Density: 1.15 g/cm³
- Rate: Rs. 5 per gram
- In-Stock Colors: Grey, Clear Transparent, White, Black

## Full Product Catalog & Inventory Levels

### 100% Pure Acetone 1L
- **SKU / Part Number:** CHM-ACT-1L
- **Price:** Rs. 2000.00 NPR
- **Stock Available:** 0 units (Out of Stock)
- **Category:** Acetone
- **Product URL:** https://www.flovotech.com/product/CHM-ACT-1L
- **Image URL:** /category-icons/acetone.svg
- **Specifications:**
  - Volume: 1 Liter
  - Purity: 99.9%
  - Use: Smoothing ABS, Cleaning

**Detailed Technical Overview & Guide:**
## Product Overview

**Flovo Tech 100% Pure Laboratory Grade Acetone (1 Liter)** is a high-potency chemical solvent essential for advanced 3D printing post-processing, solvent welding, and industrial degreasing. 

Its primary application in 3D printing is **Acetone Vapor Smoothing of ABS and ASA filaments**, transforming rough, stepped FDM 3D prints into mirror-smooth, glossy surfaces that look and feel like injection-molded parts. It can also be mixed with ABS scrap to create "ABS Juice" or "ABS Slurry" for bulletproof bed adhesion.

:::pros
- 100% pure solvent with zero additives or water dilution
- Completely dissolves ABS and ASA surface layers for mirror-like vapor smoothing
- Welds ABS parts together chemically, creating joints stronger than the raw plastic
- Dissolves stubborn cyanoacrylate (super glue) and industrial adhesives
- High solvency strips grease, oils, and stubborn resins easily
:::

:::cons
- **Do NOT use on PEI sheets!** Acetone damages textured PEI and degrades smooth PEI over time.
- Does NOT smooth PLA or PETG (PETG is chemically resistant to acetone).
- Extremely flammable with volatile vapors; must be used with adequate ventilation and no sparks.
- Melts most common plastics (polystyrene, ABS, acrylic); store only in metal or HDPE containers.
:::

:::best-for
- **ABS / ASA Vapor Smoothing**: Smoothing layer lines on helmets, cosplay armor, mechanical enclosures, and decorative figurines.
- **Chemical Solvent Welding**: Bonding multi-part ABS assemblies into a single monolithic component.
- **ABS Slurry / Juice**: Mixing small ABS filament scraps to create high-adhesion bed adhesive.
- **Tool Degreasing**: Cleaning metal nozzles, heater blocks, and grease-caked tools.
:::

:::tip
**Pro Vapor Smoothing Technique (Cold Vapor Method):**
1. Place a paper towel soaked with 30-50 mL of acetone around the inside perimeter of an airtight glass or metal container.
2. Elevate your ABS print on a small ceramic or metal pedestal so it does NOT touch liquid acetone directly.
3. Seal the container for 20–45 minutes. The heavy acetone vapors will naturally dissolve the outer layer lines.
4. Remove carefully and let dry in a ventilated area for 12 hours until the plastic fully re-hardens.
:::

## Technical Specifications & Safety

| Parameter | Specification |
| --- | --- |
| **Chemical Formula** | C₃H₆O (Dimethyl Ketone) |
| **Purity** | 99.9% Pure Industrial/Lab Grade |
| **Volume** | 1,000 mL (1.0 Liter) |
| **Boiling Point** | 56°C |
| **Target Plastics** | ABS, ASA (Incompatible with PLA, PETG, TPU) |
| **Safety Notice** | Work outdoors or under an extraction hood. Wear eye protection and nitrile gloves. |

## Video Guide & Tutorial

Watch how to safely build a DIY cold vapor smoothing chamber and achieve injection-molded finishes on ABS parts:

[DIY Cold Acetone Vapor Smoothing Tutorial for ABS 3D Prints](https://www.youtube.com/watch?v=IWP91myovjM)

### Isopropyl Alcohol 99% 1L
- **SKU / Part Number:** CHM-IPA-1L
- **Price:** Rs. 1000.00 NPR
- **Stock Available:** 0 units (Out of Stock)
- **Category:** Isopropyl Alcohol
- **Product URL:** https://www.flovotech.com/product/CHM-IPA-1L
- **Image URL:** /category-icons/isopropyl-alcohol.svg
- **Specifications:**
  - Volume: 1 Liter
  - Purity: 99%
  - Use: Bed cleaning, resin washing

**Detailed Technical Overview & Guide:**
## Product Overview

**Flovo Tech 99% Pure Isopropyl Alcohol (IPA - 1 Liter)** is an indispensable laboratory-grade solvent for 3D printing enthusiasts, electronics repair technicians, and makers. Formulated with 99.9% purity and virtually zero water content, it evaporates rapidly without leaving behind residue, streaks, or mineral deposits.

In 3D printing, 99% IPA serves two vital purposes:
1. **Bed Degreaser**: Strips away microscopic finger oils and dust from PEI, glass, and spring steel build plates to guarantee flawless first-layer adhesion.
2. **SLA/Resin Wash**: Dissolves unpolymerized liquid resin from SLA/DLP/LCD resin 3D prints prior to UV curing.

:::pros
- Ultra-high 99% purity evaporates almost instantaneously with zero residue
- Restores magnetic PEI bed adhesion by dissolving fingerprint oils and micro-debris
- Rapidly washes uncured photopolymer resin from complex miniature cavities
- Safe for cleaning delicate PCB electronics, flux residues, and camera lenses
- Packaged in a chemical-resistant, tightly sealed safety bottle
:::

:::cons
- Flammable liquid; must be kept away from open flames, hot printer nozzles, and sparks
- Volatile solvent vapors; use in a well-ventilated workspace
- Repeated skin contact can dry out skin; wear nitrile gloves during prolonged cleaning
- Not suitable for acrylics or polycarbonate, which can craze under solvent stress
:::

:::best-for
- **3D Print Bed Cleaning**: Routine wipe-down of PEI sheets, glass beds, and BuildTak surfaces before starting prints.
- **Resin 3D Print Washing**: Cleaning uncured resin from Anycubic, Elegoo, Creality, or Phrozen resin prints.
- **Electronics PCB Cleaning**: Removing sticky rosin flux after soldering wires or SMD chips.
- **Thermal Paste Removal**: Safely cleaning CPU and GPU heat spreaders before applying new thermal grease.
:::

:::tip
**Pro Cleaning Tip:** Never spray IPA onto a hot print bed (>45°C). The rapid evaporation creates sudden vapor fumes and cools the bed unevenly. Always wipe down your PEI sheet when the bed is completely cool using a clean microfiber cloth.
:::

## Technical Specifications & Handling

| Parameter | Specification |
| --- | --- |
| **Purity** | ≥ 99.0% Pure Isopropanol |
| **Volume** | 1,000 mL (1.0 Liter) |
| **Flash Point** | 12°C (Highly Flammable Liquid & Vapor) |
| **Evaporation Rate** | Very Fast (Residue Free) |
| **Recommended Storage** | Cool, dark, well-ventilated storage cabinet away from heat sources |
| **Recommended PPE** | Nitrile gloves, safety goggles |

## Video Guide & Cleaning Walkthrough

Watch how proper bed degreasing with 99% IPA completely eliminates first-layer adhesion failures:

[How to Properly Clean and Maintain 3D Printer PEI Beds](https://www.youtube.com/watch?v=dMLA6vD4Iog)

### Additional Guides:
- [Washing and Curing Resin 3D Prints](https://www.youtube.com/watch?v=8339c9U121w) — Step-by-step resin cleaning with Isopropyl Alcohol.

### Crystal Clear Epoxy Resin A+B Kit 1.5 kg
- **SKU / Part Number:** CHM-EPX-AB-1500G
- **Price:** Rs. 2250.00 NPR
- **Stock Available:** 0 units (Out of Stock)
- **Category:** Epoxy Resin
- **Product URL:** https://www.flovotech.com/product/CHM-EPX-AB-1500G
- **Image URL:** /category-icons/epoxy-resin.svg
- **Specifications:**
  - Kit contents: Part A resin and Part B hardener
  - Total weight: 1.5 kg
  - Mix ratio: 2:1 (follow product label for measuring method)
  - Finish: Crystal clear, glossy
  - Suitable for: Jewelry, keychains, coasters, art and protective coatings
  - Handling: Use suitable gloves and eye protection in a ventilated area; read the product label and safety data sheet

**Detailed Technical Overview & Guide:**
## Product Overview

**Crystal Clear Epoxy Resin A+B Kit (1.5 kg Net Weight)** is an ultra-pure, two-part liquid polymer system designed for 3D print surface coating, gap filling, composite casting, and artisan craft making. 

Featuring an easy **2:1 mixing ratio** (Part A Resin : Part B Hardener), this formulation is self-leveling, low in odor, and engineered with advanced UV stabilizers to prevent ambering or yellowing over time. In 3D printing, brushing a thin coat over FDM prints fills layer lines and capillary micropores, producing an ultra-glossy, water-impermeable armor that significantly increases structural stiffness.

:::pros
- Fills 3D print layer lines effortlessly, eliminating hours of manual sanding
- Self-leveling formula creates a glass-smooth, ultra-high-gloss protective shell
- Waterproofs porous FDM prints for fluid reservoirs, vases, and outdoor art
- Low odor and zero volatile organic compounds (VOC) for safe studio crafting
- UV-resistant chemistry protects against sun-induced yellowing
- Excellent bubble-release properties during curing
:::

:::cons
- Requires precise measuring by weight or volume for complete cure
- Curing requires 24 hours at room temperature (72 hours for full Shore D hardness)
- Exothermic reaction; do not mix excessively large batches in a single cup all at once
:::

:::best-for
- **3D Print Smoothing & Waterproofing**: Coating PLA, PETG, and ABS prints to create glossy, waterproof vessels and watertight pipes.
- **Resin Art & Encapsulation**: Preserving flowers, coins, LED circuits, and micro-electronics inside clear acrylic blocks.
- **Jewelry & Keychains**: Making glossy keychains, earrings, and custom pendants.
- **Tabletop & Diorama Water Effects**: Pouring realistic transparent rivers, waterfalls, and lakes for miniature models.
:::

:::tip
**Pro Application Technique:**
1. Sand your 3D print lightly with 220-grit sandpaper to give the resin mechanical tooth.
2. Mix Part A and Part B thoroughly for 3 minutes, scraping container sides and bottom.
3. Apply a thin, even coat using a disposable foam brush or silicone spatula.
4. Wave a heat gun or torch lightly over the surface 5 minutes after application to pop any microscopic bubbles.
:::

## Technical Specifications & Mix Ratios

| Parameter | Specification |
| --- | --- |
| **Total Kit Weight** | 1.5 kg (1,000 g Part A + 500 g Part B) |
| **Mix Ratio** | 2:1 by weight (Follow package label instructions) |
| **Working Time (Pot Life)** | 35 – 45 minutes @ 25°C |
| **Tack-Free Cure Time** | 8 – 12 hours |
| **Full Hardness Cure** | 24 – 48 hours |
| **Cured Hardness** | 82 – 85 Shore D |
| **Tensile Strength** | ~65 MPa |

## Video Guide & Tutorial

Watch the MatterHackers step-by-step masterclass on applying epoxy resin coatings to smooth and reinforce 3D printed parts:

[How to Use Epoxy Resin to Smooth and Strengthen 3D Prints](https://www.youtube.com/watch?v=ChkHuFU90WE)

### Additional Guides:
- [Using Epoxy Resin with 3D Printing Projects](https://www.youtube.com/watch?v=8Gzy6NKU3kg) — Creative finishing, casting, and polishing walkthrough.

### Kingroon PETG Basic 1.75mm 1kg - White
- **SKU / Part Number:** FIL-KGN-PETG-WHT
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 24 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-WHT
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-WHT.jpg
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: White
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Opaque White)** is an industrial-grade polyethylene terephthalate glycol filament engineered for high-performance functional 3D printing. It combines the effortless printability and low warping of standard PLA with the mechanical toughness, heat resistance, and environmental durability of ABS.

Kingroon filaments are manufactured with strict diameter tolerances of **±0.02 mm**, ensuring smooth, consistent feeding without nozzle clogging or erratic extrusion. The clean, opaque white finish provides a crisp, professional aesthetic ideal for consumer electronics, enclosures, household fixtures, and medical prototypes.

:::pros
- High impact resistance and tensile toughness compared to brittle PLA
- Exceptional inter-layer adhesion that creates virtually watertight, solid parts
- Superior thermal stability with a heat deflection temperature up to ~75°C
- Weatherproof, UV-resistant, and chemically resistant to mild acids and bases
- Odorless and low-fume printing suitable for home workshops and classrooms
:::

:::cons
- Hygroscopic nature means it absorbs moisture quickly if left in humid air
- Prone to fine cobweb stringing if retraction and temperatures are not tuned
- Bonds aggressively to bare smooth PEI sheets (release agent like glue stick recommended to prevent surface tearing)
- Requires higher nozzle temperatures (230°C–250°C) and a heated bed (70°C–80°C)
:::

:::best-for
- **Outdoor Enclosures & Brackets**: Weather-resistant security camera housings, solar brackets, and antenna mounts.
- **Functional Prototypes**: Mechanical gears, drone arms, RC car parts, and snap-fit assemblies requiring flex without snapping.
- **Water-Tight Containers**: Hydroponic fittings, plumbing adapters, vase mode plant pots, and aquarium equipment.
- **Consumer Electronics**: Raspberry Pi cases, switch covers, and custom battery holders.
:::

:::tip
**Pro Tuning Tip:** PETG does not like being excessively "squished" on the first layer like PLA. Raise your Z-offset by +0.02 mm to +0.04 mm to prevent nozzle buildup. Keep part cooling fan at **20% to 40%** to maximize layer welding; turn fan off for the first 3 layers.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 230°C – 250°C (Sweet spot: 240°C) |
| **Heated Bed Temperature** | 70°C – 80°C (Sweet spot: 75°C) |
| **Print Speed** | 40 – 80 mm/s (Up to 150 mm/s on CoreXY machines) |
| **Part Cooling Fan** | 20% – 40% (Off for layers 1–3; 50% for bridges) |
| **Retraction (Direct Drive)** | 0.8 mm – 1.5 mm @ 35–45 mm/s |
| **Retraction (Bowden)** | 4.0 mm – 6.0 mm @ 40–50 mm/s |
| **Build Surface** | Textured PEI sheet, G10 Garolite, or glass with glue stick |
| **Drying Temperature** | 65°C for 4–6 hours before use in humid climates |

## Video Guide & Calibration Walkthrough

Watch the in-depth material analysis by CNC Kitchen comparing PETG mechanical strength, temperature thresholds, and layer bonding against PLA and ABS:

[The Ultimate Guide to 3D Printing PETG Reliably](https://www.youtube.com/watch?v=ycGDR752fT0)

### External Resources & Slicer Profiles
- [Teaching Tech 3D Printer Calibration Guide](https://teachingtechyt.github.io/calibration.html) — Dial in your retraction, flow rate, and temp towers.
- [Prusa Research PETG Material Guide](https://help.prusa3d.com/article/petg_2059) — Comprehensive guide on bed adhesion and cleaning protocols.

### Kingroon PETG Basic 1.75mm 1kg - Black
- **SKU / Part Number:** FIL-KGN-PETG-BLK
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 14 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-BLK
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-BLK.jpg
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: Black
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Jet Black)** is the quintessential workhorse filament for makers, engineers, and prototyping labs. Delivering a deep, satin-gloss black finish, it hides layer lines exceptionally well while offering industrial-strength mechanical properties that outlast standard PLA prints outdoors and under stress.

Kingroon uses premium raw PETG resin with advanced pigments that maintain consistent optical density without compromising melt flow or layer bonding. Ideal for professional enclosures, brackets, automotive accessories, and robotics assemblies.

:::pros
- Satin jet-black finish masks layer lines and produces production-ready parts
- High tensile strength (approx. 50 MPa) and fatigue resistance under cyclic loads
- Excellent UV resistance; will not yellow, degrade, or become brittle under direct sunlight
- High chemical resilience against greases, oils, alcohols, and household detergents
- Tangle-free neat spool winding with tight ±0.02 mm tolerance
:::

:::cons
- Highly sensitive to ambient humidity; wet filament causes popping sounds and surface zits
- Can exhibit stringing over open travels if travel acceleration and retraction are low
- Highly aggressive adhesion to glass and smooth PEI beds without a separation layer
:::

:::best-for
- **Automotive Interior Accessories**: Phone mounts, cup holder adapters, cable clips, and glovebox organizers.
- **Robotics & CNC Components**: Structural motor mounts, endstop brackets, sensor housings, and drag chain links.
- **Workshop Fixtures**: Tool holders, pegboard brackets, drill bit cases, and dust extraction ports.
- **Production Enclosures**: IoT gateways, electronic sensor housings, and rugged test enclosures.
:::

:::tip
**Pro Tuning Tip:** When printing black PETG for structural parts, drop print speed to **50 mm/s** and run the hotend at **242°C**. Lower speeds give the polymer chains more time to thermally weld, yielding near injection-molded break strength.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 230°C – 250°C (Optimal: 240°C) |
| **Heated Bed Temperature** | 70°C – 80°C |
| **Print Speed** | 50 – 100 mm/s (Slower for maximum gloss and strength) |
| **Part Cooling Fan** | 25% – 35% |
| **Retraction Distance** | Direct Drive: 1.0 mm | Bowden: 4.5 mm |
| **First Layer Height** | 0.24 mm (Ensures generous extrusion bead) |
| **Density** | 1.27 g/cm³ |
| **Glass Transition Temp** | 75°C |

## Video Guide & Calibration Walkthrough

Learn how cooling settings drastically alter PETG layer strength in this test video:

[How Less Cooling Yields Dramatically Stronger PETG Prints](https://www.youtube.com/watch?v=Bl2ESvtBiLo)

### External Resources & Slicer Profiles
- [Bambu Studio & OrcaSlicer PETG Tuning](https://wiki.bambulab.com/en/filament-acc/filament/filament-guide-petg) — Official Bambu Lab parameters for generic and high-speed PETG.

### Kingroon PETG Basic 1.75mm 1kg - Grey
- **SKU / Part Number:** FIL-KGN-PETG-GRY
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 10 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-GRY
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-GRY.jpg
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: Grey
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Mechanical Grey)** is specifically formulated for technical draftsmen, functional prototyping, and engineering validation prints. The neutral, matte-sheen grey tone accentuates surface details, fillets, chamfers, and geometric tolerances, making visual inspection effortless.

Featuring superior impact resistance and thermal stability up to 75°C, Kingroon Grey PETG withstands continuous mechanical load and outdoor exposure without warping or cracking.

:::pros
- Neutral grey color highlights fine details, layer consistency, and critical design features
- Excellent impact absorption; bends under extreme stress rather than snapping catastrophically
- Low thermal shrinkage; delivers dimensional accuracy within ±0.1 mm on calibrated printers
- Superior resistance to weathering, rain, and solar UV radiation
:::

:::cons
- Demands a clean, grease-free print bed with 75°C surface temperature
- Can produce fine strings on travel moves across open cavities
- Absorbs atmospheric moisture; store in airtight dryboxes with desiccant
:::

:::best-for
- **Engineering Prototypes**: Fit-checks, snap-joints, gearboxes, and functional proof-of-concept models.
- **Architectural Mockups**: Scaled structural models, facade elements, and landscape models.
- **Camera Rigging & Drone Parts**: Gimbal adapters, battery trays, and landing skids.
:::

:::tip
**Pro Tuning Tip:** Enable "Wipe while retracting" and "Avoid crossing perimeters" in your slicer (OrcaSlicer/PrusaSlicer/Cura). This keeps any nozzle oozing tucked neatly inside the infill where it cannot cause cosmetic blemishes on outer perimeters.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 235°C – 248°C |
| **Heated Bed Temperature** | 70°C – 80°C |
| **Print Speed** | 50 – 120 mm/s |
| **Part Cooling Fan** | 30% |
| **Bed Surface** | Powder-Coated Textured PEI |
| **Spool Weight** | 1.0 kg net (approx. 335 meters) |

## Video Guide & Calibration Walkthrough

[3D Printing Strong Functional Parts with PETG](https://www.youtube.com/watch?v=ycGDR752fT0)

### Kingroon PETG Basic 1.75mm 1kg - Copper
- **SKU / Part Number:** FIL-KGN-PETG-CPR
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 2 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-CPR
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-CPR.jpg
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: Copper
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Metallic Copper)** blends high-toughness PETG polymer with shimmering metallic micro-pigments to deliver an authentic burnished copper appearance. Unlike abrasive metal-fill filaments, Kingroon Metallic Copper is completely non-abrasive and prints seamlessly through standard 0.4 mm brass nozzles.

It is the top choice for cosplay armor, decorative steampunk mechanics, architectural accents, and luxury product enclosures that demand both visual brilliance and impact resistance.

:::pros
- Rich metallic sheen with deep copper luster that catches ambient light beautifully
- 100% non-abrasive; safe for standard brass nozzles without premature wear
- Combines decorative metallic aesthetics with PETG mechanical toughness
- High heat deflection (75°C) prevents sagging in hot vehicle cabins or sunny windows
:::

:::cons
- Higher print speeds can slightly reduce the metallic luster; print outer perimeters slower (35–45 mm/s) for peak shine
- Requires dry storage to prevent surface vapor pits that dull the metallic finish
:::

:::best-for
- **Cosplay & Props**: Steampunk gadgets, medieval armor trim, medals, and fantasy weaponry.
- **Interior Decor**: Planters, desk organizers, lighting fixtures, and decorative clock gears.
- **Luxury Enclosures**: Audio equipment faceplates, retro radio frames, and headphone stands.
:::

:::tip
**Pro Tuning Tip:** For the most dazzling metallic gloss, increase nozzle temperature by +5°C (to ~245°C) and reduce your outer wall speed to 35 mm/s. The higher heat and lower shear speed allow the metallic flakes to align flat against the layer line.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 235°C – 250°C (245°C for maximum gloss) |
| **Bed Temperature** | 70°C – 80°C |
| **Outer Wall Speed** | 35 – 45 mm/s |
| **Inner Wall & Infill Speed** | 60 – 90 mm/s |
| **Cooling Fan** | 20% – 30% |

## Video Guide & Calibration Walkthrough

[How to Print Silky & Metallic Filaments for Maximum Gloss](https://www.youtube.com/watch?v=M3bwJx8ZkMA)

### Kingroon PETG Basic 1.75mm 1kg - Coffee
- **SKU / Part Number:** FIL-KGN-PETG-COF
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 2 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-COF
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-COF.jpg
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: Coffee
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Rich Coffee / Deep Bronze Brown)** provides an earthy, warm aesthetic reminiscent of dark roasted coffee beans and aged walnut wood. This unique, rich hue makes it popular among makers crafting architectural accents, furniture fittings, outdoor lifestyle gear, and custom camera accessories.

It delivers all standard PETG benefits: weather resistance, chemical stability, low shrinkage, and high impact toughness.

:::pros
- Deep, elegant coffee-brown tone with a smooth, professional semi-gloss surface
- Highly resistant to UV radiation and moisture absorption once printed
- Ideal for blending with wooden furniture, leather accessories, and natural outdoor environments
- Excellent elongation at break; withstands flex and drop shocks
:::

:::cons
- Requires proper bed pre-heating (allow bed temperature to soak for 3–5 minutes before printing)
- Stringing can occur if retraction is not dialed in
:::

:::best-for
- **Furniture Accents**: Replacement cabinet clips, foot pads, shelf brackets, and cord guides.
- **Outdoor & Camping Gear**: Carabiners, tent pole clips, lantern hangers, and strap buckles.
- **Home Decor**: Custom planters, espresso machine tamp stands, and headphone docks.
:::

:::tip
**Pro Tuning Tip:** Use a 0.2 mm layer height with 3 perimeters and 25% gyroid infill for camping clips or furniture brackets. Gyroid infill provides isotropic strength in all directions.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 230°C – 245°C |
| **Bed Temperature** | 70°C – 75°C |
| **Print Speed** | 50 – 80 mm/s |
| **Cooling Fan** | 30% |

## Video Guide & Calibration Walkthrough

[3D Printing PETG Like a Pro - Complete Settings Guide](https://www.youtube.com/watch?v=ycGDR752fT0)

### Kingroon PETG Basic 1.75mm 1kg - Transparent
- **SKU / Part Number:** FIL-KGN-PETG-CLR
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 2 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-CLR
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-CLR.jpg
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: Transparent
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Crystal Clear / Transparent)** allows light transmission and optical refraction, making it the ultimate material for LED diffusers, light pipes, fluid sight glasses, and transparent containers. 

While standard 3D printing creates microscopic air boundaries between layers that make prints translucent, tuning your slicer for 100% infill, higher temperatures, and zero cooling can produce astonishingly clear, glass-like optical objects.

:::pros
- High optical light transmission; ideal for lighting fixtures and LED diffusion
- Excellent chemical resistance; will not crack or cloud when exposed to oils, greases, or water
- Extremely strong layer bonding when printed hot and slow
- Low odor and non-toxic
:::

:::cons
- Standard slicing produces a frosted glass effect due to internal layer interfaces
- True glass transparency requires strict calibration: high flow, zero cooling fan, 255°C nozzle, and very slow speeds (15–25 mm/s)
- Shows internal defects, bubbles, or contamination prominently
:::

:::best-for
- **Lighting & LED Projects**: Custom lamp shades, LED channel diffusers, lit signs, and light guides.
- **Fluids & Sight Windows**: Coolant overflow tanks, water level indicators, and chemical reservoir caps.
- **Artistic Glassware**: Vases printed in spiral vase mode with a 0.8 mm nozzle for stunning clarity.
:::

:::tip
**Pro Tuning Tip for Glass-Like Prints:** 
1. Use a **0.6 mm or 0.8 mm nozzle**.
2. Set layer height to **0.1 mm to 0.15 mm**.
3. Raise hotend temperature to **250°C – 255°C**.
4. Turn off cooling fan completely (0%).
5. Print very slowly at **15 – 20 mm/s** with 102% flow rate to eliminate internal air gaps.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 235°C – 255°C (250°C+ for maximum optical clarity) |
| **Bed Temperature** | 75°C – 80°C |
| **Print Speed** | 20 – 50 mm/s |
| **Part Cooling Fan** | 0% – 20% |
| **Layer Height** | 0.12 mm – 0.20 mm |

## Video Guide & Calibration Walkthrough

Watch the renowned tutorial by CNC Kitchen on how to achieve 100% glass-like transparent 3D prints:

[How to 3D Print Truly Transparent Glass-Like Parts](https://www.youtube.com/watch?v=M3bwJx8ZkMA)

### Kingroon PETG Basic 1.75mm 1kg - Orange
- **SKU / Part Number:** FIL-KGN-PETG-ORG
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 2 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-ORG
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-ORG.jpg
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: Orange
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Vibrant Safety Orange)** features high-visibility pigmentation designed for safety equipment, robotics, drone racing markers, workshop tools, and emergency indicators. 

Its vivid color remains intensely bright even after years of continuous outdoor sunlight exposure, backed by PETG's legendary resistance to UV degradation and rain.

:::pros
- High-visibility safety orange stands out from afar in outdoor and industrial environments
- UV-stabilized pigments prevent fading or chalking under direct sun
- Resilient against impacts, drops, vibrations, and high mechanical fatigue
- Low warping even on large prints up to 300 mm across
:::

:::cons
- High visibility means any external stringing or zits are easy to spot; tune retraction carefully
- Must be kept dry to maintain a glossy, bubble-free finish
:::

:::best-for
- **Drone & RC Gear**: Quadcopter arms, antenna mounts, propeller guards, and battery skids.
- **Safety Equipment**: High-visibility workshop handles, lockout-tagout clips, and caution signage.
- **Outdoor Tools**: Gardening tool handles, surveyor pegs, and flashlight diffusers.
:::

:::tip
**Pro Tuning Tip:** When printing thin-wall drone components, increase perimeter wall count to 4 instead of increasing infill. Perimeters contribute 80%+ of the total part rigidity while saving weight.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 230°C – 245°C |
| **Bed Temperature** | 70°C – 80°C |
| **Print Speed** | 50 – 90 mm/s |
| **Part Cooling Fan** | 30% |

## Video Guide & Calibration Walkthrough

[Printing Durable Drone Parts with High-Visibility PETG](https://www.youtube.com/watch?v=Bl2ESvtBiLo)

### Kingroon PETG Basic 1.75mm 1kg - Skin
- **SKU / Part Number:** FIL-KGN-PETG-SKN
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 2 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-SKN
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-SKN.jpg
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: Skin
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Skin / Peach Tone)** is specially formulated with natural flesh-toned pigments. It is the premier choice for makers and medical engineers printing prosthetic hands, anatomical education models, mannequin components, cosplay masks, and lifelike character figurines.

Unlike PLA which degrades quickly with sweat and skin oils, Kingroon Skin PETG is chemically inert, non-irritating, and easily sanitized with isopropyl alcohol or warm soapy water.

:::pros
- Natural realistic skin tone with a smooth, soft satin surface finish
- Resistant to sweat, skin oils, and common sanitizing alcohol solutions
- Durable and impact resistant; ideal for wearable assistive devices and prosthetics
- Odorless, non-toxic, and skin-safe for external contact
:::

:::cons
- Overheating (>250°C) can cause slight color shift or caramelization; keep nozzle under 240°C
- Stringing can deposit dark specks if the nozzle is dirty; clean your nozzle before starting
:::

:::best-for
- **Assistive Devices & Prosthetics**: 3D printed prosthetic fingers, hands, and socket adapters.
- **Medical & Anatomical Models**: Bone-joint demonstrations, surgical practice models, and dental study aids.
- **Cosplay & Art**: Character busts, anime figures, masks, and doll components.
:::

:::tip
**Pro Tuning Tip:** Ensure your nozzle is thoroughly cleaned of any prior dark filaments (black/grey) using cleaning filament or cold pulls before loading Skin PETG, as tiny residual specks will show clearly in pale colors.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 230°C – 240°C |
| **Bed Temperature** | 70°C – 75°C |
| **Print Speed** | 45 – 70 mm/s |
| **Part Cooling Fan** | 35% |

## Video Guide & Calibration Walkthrough

[Dialing in First Layer and Flow Rate for Clean Prints](https://www.youtube.com/watch?v=ycGDR752fT0)

### Kingroon PETG Basic 1.75mm 1kg - Beige
- **SKU / Part Number:** FIL-KGN-PETG-BGE
- **Price:** Rs. 2100.00 NPR
- **Stock Available:** 2 units (In Stock)
- **Category:** PETG
- **Product URL:** https://www.flovotech.com/product/FIL-KGN-PETG-BGE
- **Image URL:** https://s3.suulaav.com.np/hobby-shack/products/FIL-KGN-PETG-BGE.png
- **Specifications:**
  - Brand: Kingroon
  - Material: PETG Basic
  - Diameter: 1.75mm
  - Weight: 1kg
  - Color: Beige
  - Printing Temperature: 230°C - 250°C
  - Bed Temperature: 70°C - 80°C
  - Density: 1.27 g/cm³

**Detailed Technical Overview & Guide:**
## Product Overview

**Kingroon PETG Basic 1.75mm (Warm Beige / Desert Sand)** provides an earthy, muted neutral tone popular in minimalist interior design, architectural models, military hardware replicas, and tactile everyday carry items.

Its subtle sand hue conceals micro-scratches and fingerprint oils much better than pure white or gloss black, while providing the robust heat and chemical resistance characteristic of Kingroon PETG.

:::pros
- Warm, elegant desert sand / beige tone fits modern home aesthetics and tactical gear
- Resistant to staining, fingerprints, and visible scratching
- Excellent layer fusion and toughness for functional everyday tools
- Dimensional stability with minimal thermal shrinkage
:::

:::cons
- Demands 70°C+ bed temperature to prevent corner lifting on long rectangular footprints
- Requires airtight storage to prevent moisture popping
:::

:::best-for
- **Tactical & Outdoor Gear**: Two-way radio holsters, GPS mounts, and tactical gear organizers.
- **Architectural Displays**: Sandstone and concrete textured scale models.
- **Everyday Carry (EDC)**: Wallet frames, key organizers, pen cases, and phone stands.
:::

:::tip
**Pro Tuning Tip:** For a beautiful stone or ceramic-like appearance, use a matte slicer fuzzy skin texture with **0.1 mm thickness** and **0.2 mm point distance**. This diffuses light across the beige surface and completely hides all layer lines.
:::

## Recommended Printing Parameters

| Parameter | Recommended Specification |
| --- | --- |
| **Nozzle Temperature** | 230°C – 245°C |
| **Bed Temperature** | 70°C – 75°C |
| **Print Speed** | 50 – 80 mm/s |
| **Part Cooling Fan** | 30% |

## Video Guide & Calibration Walkthrough

[Advanced Slicer Settings: Fuzzy Skin and Surface Textures](https://www.youtube.com/watch?v=ycGDR752fT0)

### Bambu Lab X1 Carbon
- **SKU / Part Number:** 3DP-BMB-X1C
- **Price:** Rs. 175000.00 NPR
- **Stock Available:** 5 units (In Stock)
- **Category:** Printers
- **Product URL:** https://www.flovotech.com/product/3DP-BMB-X1C
- **Image URL:** /category-icons/printers.svg
- **Specifications:**
  - Build Volume: 256 x 256 x 256 mm
  - Max Speed: 500 mm/s
  - Enclosure: Yes
  - Hotend: 300°C All-Metal
  - LiDAR: Dual Micro-LiDAR

**Detailed Technical Overview & Guide:**
## Product Overview

The **Bambu Lab X1 Carbon** is an industry-defining CoreXY 3D printer that revolutionized additive manufacturing. Built with a carbon-fiber X-axis gantry, all-metal hotend capable of 300°C, and an active chamber temperature monitoring system, the X1-Carbon brings high-speed, multi-color engineering printing to makers and commercial labs.

Equipped with dual micro-LiDAR sensors and an AI-driven dual-core processor, the X1 Carbon automatically calibrates first-layer height, inspects extrusion flow dynamics, and detects spaghetti printing failures before filament is wasted.

:::pros
- Blazing fast printing speeds up to 500 mm/s with 20,000 mm/s² acceleration
- Micro-LiDAR auto-bed leveling and active vibration compensation (input shaping)
- All-metal 300°C hotend and hardened steel extruder gears print abrasive carbon-fiber filaments (PA-CF, PET-CF, PC) straight out of the box
- AMS (Automatic Material System) compatible for up to 16-color multi-material prints
- AI spaghetti failure detection and built-in 1080p chamber camera with live smartphone monitoring
:::

:::cons
- Proprietary ecosystem with customized hotend assemblies
- Fan noise can be significant when operating at full 500 mm/s print speeds
- Premium initial investment compared to budget bed-slingers
:::

:::best-for
- **Rapid Functional Prototyping**: Iterate complex multi-part mechanical assemblies in hours rather than days.
- **Engineering Composites**: Printing carbon-fiber nylon (PA-CF) and polycarbonate (PC) structural components.
- **Multi-Color & Multi-Material Printing**: Combining soluble supports (PVA/HIPS) with engineering polymers.
- **Low-Volume Production Runs**: High reliability allows unattended 24/7 print-farm operation.
:::

:::tip
**Pro Maintenance Tip:** Keep the carbon rod rails clean by wiping them dry with 99% Isopropyl Alcohol every 200 print hours. **Never lubricate the carbon rods with oil or grease**, as oil attracts abrasive dust. Only lubricate the lead screws with synthetic grease.
:::

## Technical Specifications

| Parameter | Specification |
| --- | --- |
| **Build Volume** | 256 x 256 x 256 mm |
| **Chassis** | Enclosed Aluminum & Glass |
| **Hotend Max Temperature** | 300°C (Hardened Steel Nozzle) |
| **Bed Max Temperature** | 110°C (120°C on 220V) |
| **Max Toolhead Speed** | 500 mm/s |
| **Max Toolhead Acceleration** | 20 m/s² (20,000 mm/s²) |
| **LiDAR Sensor** | Dual micro-LiDAR with 7-micron resolution |
| **Supported Materials** | PLA, PETG, TPU, ABS, ASA, PVA, PET, PA, PC, Carbon/Glass Fiber Reinforced |

## Video Guide & Setup Walkthrough

Watch the complete unboxing, setup, and first-print calibration tutorial:

[Bambu Lab X1 Carbon Detailed Setup & Beginner Guide](https://www.youtube.com/watch?v=B_a1DW18aPk)

### In-Depth Real World Review:
[Bambu Lab X1 Carbon Review - Crazy Fast 3D Printing](https://www.youtube.com/watch?v=hbx2KHLjeXA)

### E3D Revo Six Hotend
- **SKU / Part Number:** HTND-E3D-RVO
- **Price:** Rs. 11500.00 NPR
- **Stock Available:** 15 units (In Stock)
- **Category:** Hot Ends
- **Product URL:** https://www.flovotech.com/product/HTND-E3D-RVO
- **Image URL:** /category-icons/hot-ends.svg
- **Specifications:**
  - Voltage: 24V
  - Max Temp: 300°C
  - Nozzle System: RapidChange Revo
  - Mount: V6 Groove Mount

**Detailed Technical Overview & Guide:**
## Product Overview

The **E3D Revo Six** is the flagship RapidChange hotend from British engineering leader E3D. Engineered as a drop-in replacement for the legendary E3D V6 heatsink mount, the Revo Six eliminates messy hot-tightening, stripped heater block threads, and molten plastic leaks forever.

With the Revo ecosystem, the nozzle and heatbreak are manufactured as a single factory-sealed pre-assembled cartridge. You can swap nozzles from 0.25 mm to 0.8 mm with your bare fingers at room temperature in less than 30 seconds—no spanners, no burns, and zero thermal leaks.

:::pros
- Tool-free, finger-tight nozzle swaps in under 30 seconds at room temperature
- Factory-sealed nozzle/heatbreak eliminates thermal leakage and plastic oozing up the heatbreak threads
- Drop-in mechanical replacement for standard E3D V6 groove mounts (Prusa MK3S, Voron, Ender 3 mounts)
- Rapid-heating Ceramic Revo HeaterCore reaches 200°C in under 35 seconds
- Ultra-compact, lightweight design reduces toolhead inertia for faster printing
:::

:::cons
- Requires proprietary Revo nozzles (cannot use legacy M6 V6 nozzles)
- Higher cost per nozzle compared to generic brass nozzles
- Maximum sustained temperature is 300°C (not suited for PEEK or ultra-high-temp polymers above 300°C)
:::

:::best-for
- **Prusa MK3/MK3S+ Upgrades**: Instant drop-in upgrade with zero firmware modifications required.
- **Multi-Nozzle Workflows**: Rapidly switching between a 0.25 mm nozzle for miniature figurines and a 0.8 mm nozzle for large functional bins.
- **Voron & Custom CoreXY Builds**: Lightweight heatsink minimizes resonance and input-shaping ringing.
:::

:::tip
**Pro Tuning Tip:** After installing the Revo Six, always run a **PID Auto-Tune** (`M303 E0 S210 C8`) from your printer menu or terminal. The Revo Ceramic HeaterCore has significantly less thermal mass than a traditional aluminum block and heats up much faster!
:::

## Technical Specifications

| Parameter | Specification |
| --- | --- |
| **System Compatibility** | E3D Revo Nozzle Cartridge Ecosystem |
| **Voltage** | 24V (40W Ceramic Revo HeaterCore) |
| **Max Operating Temperature** | 300°C |
| **Mounting Standard** | V6 Groove Mount (Diameter: 12 mm, Ring: 16 mm) |
| **Included Sensor** | 100k Semitec 104NT-4-R025H42G Thermistor |
| **Nozzle Sizes Available** | 0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm, ObXidian Wear-Resistant |

## Video Guide & Installation Walkthrough

Watch the full installation and performance review of the E3D Revo Six:

[Installing and Testing the E3D Revo Six Hotend](https://www.youtube.com/watch?v=3b66PJQWDlw)

### Feature Deep-Dive:
[E3D RapidChange Revo Six Review - Change Nozzles Super Fast](https://www.youtube.com/watch?v=10Sm_CU2q0Q)

### PEI Spring Steel Sheet 235x235
- **SKU / Part Number:** BED-PEI-235
- **Price:** Rs. 2850.00 NPR
- **Stock Available:** 30 units (In Stock)
- **Category:** Beds
- **Product URL:** https://www.flovotech.com/product/BED-PEI-235
- **Image URL:** /category-icons/beds.svg
- **Specifications:**
  - Material: Textured/Smooth PEI Spring Steel
  - Size: 235x235mm
  - Magnetic Base: Included
  - Max Temp: 120°C

**Detailed Technical Overview & Guide:**
## Product Overview

The **Dual-Sided Textured & Smooth PEI Spring Steel Build Plate (235 x 235 mm)** is the ultimate print bed upgrade for desktop 3D printers. Featuring high-grade spring steel coated with genuine Ultem PEI, this plate provides unstoppable first-layer adhesion while hot and effortless part release when cool.

When your print is finished, simply remove the magnetic sheet and give it a gentle flex—your prints pop right off without scrapers, razor blades, or damaged bed surfaces.

:::pros
- Dual-sided versatility: Textured PEI side leaves an injection-molded satin texture; smooth PEI side leaves a mirror-smooth glass finish
- High-grade spring steel flexes effortlessly and always returns to dead flat
- Strong magnetic base with high-temp 3M adhesive withstands up to 120°C bed temperatures
- Flawless adhesion for PLA, PETG, ABS, ASA, and TPU
- Eliminates dangerous scrapers, razor blades, and gouged beds
:::

:::cons
- Sensitive to finger grease and skin oils; requires regular wiping with 99% Isopropyl Alcohol
- PETG bonds too aggressively to smooth PEI (use the textured side or a thin layer of glue stick to prevent surface tearing)
- Do NOT clean with acetone; acetone degrades textured PEI coatings
:::

:::best-for
- **Direct Fit Compatibility**: Creality Ender 3 / Ender 3 Pro / Ender 3 V2 / S1, Ender 5, Elegoo Neptune 3/4, BIQU B1, TwoTrees, and any 235x235 mm bed printer.
- **Effortless Part Removal**: Large footprint prints that normally stick too hard to glass beds.
- **Satin Bottom Surfaces**: Giving consumer products a professional textured bottom face.
:::

:::tip
**Pro Maintenance Protocol:**
1. **Daily Wipe**: Wipe with 99% Isopropyl Alcohol on a microfiber cloth between prints when the bed is cool.
2. **Deep Clean**: If parts stop sticking, wash the sheet in the sink with warm water and Dawn dish soap using a soft sponge. Dish soap strips finger oils that alcohol simply smears around.
:::

## Technical Specifications

| Parameter | Specification |
| --- | --- |
| **Dimensions** | 235 mm x 235 mm |
| **Coating Type** | Side A: Textured Powder-Coated PEI | Side B: Smooth PEI Film |
| **Core Material** | Hardened Spring Steel (0.4 mm thickness) |
| **Magnetic Base** | High-energy ferrite magnet with 3M 300LSE adhesive |
| **Max Bed Temperature** | 120°C continuous |
| **Compatible Printers** | Creality Ender 3 series, Ender 5, Neptune 3/4, K1 (235x235) |

## Video Guide & Maintenance Walkthrough

Watch the complete guide on cleaning, dialing in Z-offset, and caring for PEI spring steel build plates:

[How to Clean and Maintain 3D Printer PEI Beds](https://www.youtube.com/watch?v=dMLA6vD4Iog)