Kingroon PETG Basic 1.75mm 1kg - Grey
Part Number: FIL-KGN-PETG-GRY
Rs. 2100.00
In Stock (10)
Specifications
| Brand | Kingroon |
| Material | PETG Basic |
| Diameter | 1.75mm |
| Weight | 1kg |
| Color | Grey |
| Printing Temperature | 230°C - 250°C |
| Bed Temperature | 70°C - 80°C |
| Density | 1.27 g/cm³ |
filamentpetgkingroon3d printing1.75mmbasic1kg
Product Guide, Usages & Technical Reference
Product Overview
Kingroon PETG Basic 1.75mm (Mechanical Grey) is specifically formulated for technical draftsmen, functional prototyping, and engineering validation prints. The neutral, matte-sheen grey tone accentuates surface details, fillets, chamfers, and geometric tolerances, making visual inspection effortless.
Featuring superior impact resistance and thermal stability up to 75°C, Kingroon Grey PETG withstands continuous mechanical load and outdoor exposure without warping or cracking.
Pros & Strengths
- Neutral grey color highlights fine details, layer consistency, and critical design features
- Excellent impact absorption; bends under extreme stress rather than snapping catastrophically
- Low thermal shrinkage; delivers dimensional accuracy within ±0.1 mm on calibrated printers
- Superior resistance to weathering, rain, and solar UV radiation
Cons & Limitations
- Demands a clean, grease-free print bed with 75°C surface temperature
- Can produce fine strings on travel moves across open cavities
- Absorbs atmospheric moisture; store in airtight dryboxes with desiccant
Best For & Ideal Applications
- Engineering Prototypes: Fit-checks, snap-joints, gearboxes, and functional proof-of-concept models.
- Architectural Mockups: Scaled structural models, facade elements, and landscape models.
- Camera Rigging & Drone Parts: Gimbal adapters, battery trays, and landing skids.
Pro Tip & Recommended Configuration
Pro Tuning Tip: Enable "Wipe while retracting" and "Avoid crossing perimeters" in your slicer (OrcaSlicer/PrusaSlicer/Cura). This keeps any nozzle oozing tucked neatly inside the infill where it cannot cause cosmetic blemishes on outer perimeters.
Recommended Printing Parameters
| Parameter | Recommended Specification |
|---|---|
| Nozzle Temperature | 235°C – 248°C |
| Heated Bed Temperature | 70°C – 80°C |
| Print Speed | 50 – 120 mm/s |
| Part Cooling Fan | 30% |
| Bed Surface | Powder-Coated Textured PEI |
| Spool Weight | 1.0 kg net (approx. 335 meters) |
Video Guide & Calibration Walkthrough
▶
3D Printing Strong Functional Parts with PETG
Watch on YouTube
↗